Find a Service Center
- Series HBT 2 Position RH (Std) Thrust Slide
- 16" Stroke
- Steel Rails
- Composite Bearing w/Contaminant Tolerant Seals
- 2" Bore NFPA Pneumatic Cylinder
description
- The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
- Three-position cylinders
- Adjustable stop collars
- Cylinder cushions
- Cylinder with rod lock mechanism
- External bumpers
- Flow controls
- Fluorocarbon (Viton) seals
- Oversized shafting with composite bushings
- Proximity sensors
- Reed, hall effect and inductive proximity sensors
- Shock absorbers
- Shock ready
- Slides without cylinders
| Proximity Sensor | No Proximity Sensor |
| Intermediate Stroke | N/A |
| Cylinder Bore Size | 2 in |
| Temperature Range [Max] | 165 °F |
| Base Wt. | 14.35 lb |
| Positions | 2 Position |
| Proximity Sensor Code | None |
| Stroke Tolerance | +0.030 in / -0.000 in |
| Shock Absorbers - Slide | No Shock Absorber |
| Series | HBT |
| Stroke | 16 in |
| Port Location | Standard (Position 1) |
| Support Rod Material | Steel |
| Cylinder Seal Material | Buna-N |
| Bumpers - Slide | No Bumpers |
| Slide Orientation | Right Hand (Standard) |
| Port Type | NPTF |
| Dowel Pin Holes | w/o Dowel Pin Holes |
| Pressure [Max] | 150 psi |
| Port Size | 3/8 |
| Support Rod Diameter | 25 mm |
| Cylinder Type | NFPA Pneumatic Cylinder |
| Weight per Inch | 0.64 lb |
| Slide Type | Thrust Slide |
| Temperature Range [Min] | 0 °F |
| Bearing Type | Composite Bearing w/Contaminant Tolerant Seals |
| Slide Configuration Option Code | None |
| Cushions - Slide | No Cushions |
| Flow Controls | w/o Flow Controls |
| Weight | 24.59 LB |
