Find a Service Center
- Series HBT 2 Position RH (Std) Thrust Slide
- 23" Stroke
- Steel Rails
- Composite Bearing
- 2" Bore NFPA Pneumatic Cylinder
description
- The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
- Three-position cylinders
- Adjustable stop collars
- Cylinder cushions
- Cylinder with rod lock mechanism
- External bumpers
- Flow controls
- Fluorocarbon (Viton) seals
- Oversized shafting with composite bushings
- Proximity sensors
- Reed, hall effect and inductive proximity sensors
- Shock absorbers
- Shock ready
- Slides without cylinders
| Slide Orientation | Right Hand (Standard) |
| Temperature Range [Max] | 165 °F |
| Support Rod Diameter | 25 mm |
| Slide Type | Thrust Slide |
| Cylinder Bore Size | 2 in |
| Port Size | 3/8 |
| Proximity Sensor | No Proximity Sensor |
| Positions | 2 Position |
| Port Type | NPTF |
| Shock Absorbers - Slide | No Shock Absorber |
| Stroke Tolerance | +0.030 in / -0.000 in |
| Pressure [Max] | 150 psi |
| Proximity Sensor Code | None |
| Port Location | Standard (Position 1) |
| Support Rod Material | Steel |
| Series | HBT |
| Cylinder Type | NFPA Pneumatic Cylinder |
| Intermediate Stroke | N/A |
| Bumpers - Slide | Bumpers (Both Ends) |
| Slide Configuration Option Code | B |
| Bearing Type | Composite Bearing |
| Flow Controls | w/o Flow Controls |
| Temperature Range [Min] | 0 °F |
| Cylinder Seal Material | Buna-N |
| Stroke | 23 in |
| Cushions - Slide | No Cushions |
| Base Wt. | 14.35 lb |
| Weight per Inch | 0.64 lb |
| Dowel Pin Holes | w/o Dowel Pin Holes |
| Weight | 29.07 LB |
