Parker Valvair II Four-Way. Manifold Mounted valves have been trusted for years in applications requiring a heavy-duty, all-metal valve that will shift when called upon, even after being idle for an extended period of time. The solenoid/air pilot design of this valve uses line pressure to shift the spool. Single solenoid valves may be mounted in any position. Double solenoid valves should be mounted horizontally. Synthetic rubber o-ring seals are specially compounded for superior wear and abrasion resistance. Solenoids are encapsulated in epoxy for low power consumption and maximum life. These valves are very tolerant to contamination both inside and out. In dirty applications like foundries, steel mills, tire plants, aggregate plants and mines, they can be real problem solvers.
applications
Foundries
Steel mills
Tire plants
Aggregate plants
Mines
caution
Ball screw may require additional straightening after machining. Ball screw systems will backdrive, a brake will be required to hold the load.
Cv Flow
4.8
Operator
Solenoid w/Light & Locking Override
Coil Style
Encapsulated
Operating Pressure Range
35 psi to 140 psi
Actuator Type
Solenoid
Valve Type
4-Way, 2 Position
Lights
Yes
Port Type
NPT
Wiring Options
None
Installed Options
None
Series
Valvair II Series
Overrides
No Overrides
Operation
Electric
Valve Body Style
Manifold Mounted
Voltage Rating
24 VDC
Basic Size
3/8 in
Valve Duty
Standard Duty
Spool Description
N/A
Port Size
3/8
Solenoid
Double
Valve Size
3/8 in
Length
10.460 in
Stations
N/A
Return Type
Solenoid
Height
8.740 in
Weight
6.833 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
