Find a Service Center
- Radial Shaft Seal
- 466.73 mm Shaft Diameter
- 504.83 mm Housing Bore Diameter
- 17.48 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Seal Application | General Purpose |
| Temperature Range [Max] | 250 °F |
| Housing Bore Dia. | 504.83 mm |
| Spring Material | Carbon Steel Garter |
| Case Construction | Steel Case w/Inner Case |
| Seal Design | Molded Design |
| Cover/Compensation Ring/Plate Required | No |
| Pressure | 15 psi |
| Surface Speed [Nom] | 5,000 ft/min |
| Temp Description | w/4 Adjustable Lugs |
| Lip Type | Single Lip w/Spring |
| Inch/Metric | Metric |
| Lip Material | Duralip (Carboxylated Nitrile) |
| Shaft Dia. | 466.73 mm |
| Construction | HDS3 |
| Lip Style | Internal |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
| Temperature Range [Min] | -40 °F |
| Weight | 8.021 LB |
| EAN or UPC | 85311131575 |
