Find a Service Center
Alternate Products
- 45 mm ID x 85 mm OD x 1 3/16" Wide
- Double Sealed (Contact)
- ABEC 1
- Steel Cage
- C3 Clearance
applications
- Pumps
- Compressors
- Centrifuges
features
- Inner and outer ring raceway
- Suitable for simultaneously acting radial and axial loads
- Axial load capacity increases with increasing contact angle
compliances
- 0
| Series | 322 |
| Enclosure | Double Sealed |
| Snap Ring | No Snap Ring |
| Inch/Metric | Metric Bore |
| Contact Angle | 30° |
| Outer Ring Width | 1 3/16 in |
| Seal Material | Synthetic Rubber w/Steel Reinforcement |
| O.D. | 85 mm |
| Radial Internal Clearance | C3 |
| Limiting Speed - Sealed | 5000 rpm |
| Flush Ground | No |
| Limiting Speed - Oil | 6700 rpm |
| Ball Material | Steel |
| Capacity | Standard Capacity |
| Bearing Type | Angular Contact |
| Inner Ring Width | 1 3/16 in |
| Temperature Range [Min] | -22 °F |
| O.D. Type | Straight |
| icNumber | 7700466 |
| Cage Material | Steel |
| Seal Type | Contact Seals |
| I.D. | 45 mm |
| Dynamic Load Rating | 11000 lbf |
| Temperature Range [Max] | 284 °F |
| Origin | Double Row Deep Groove |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Width | 1.19 in, 30.16 mm |
| Static Load Rating [Max] | 8770 lbf |
| Material | Steel |
| Lubricant | Polyurea Base |
| Precision | Standard |
| Bearing Design | Converging Angle Design |
| Precision Level | Standard (ABEC 1) |
| Locking Device | No Locking Device |
| No. in Set | Single Bearing |
| Bore Type | Round Bore |
| Preload Level | None |
| Cage Type | Metal |
| Limiting Speed - Grease | 5000 rpm |
| Rows of Balls | Double |
| Weight | 1.477 LB |
| EAN or UPC | 7316573931157 |
