Find a Service Center
Alternate Products
- 17 mm ID x 47 mm OD x 7/8" Wide
- Double Sealed (Contact)
- ABEC 1
- Plastic Cage
- Normal Clearance
applications
- Pumps
- Compressors
- Centrifuges
features
- Inner and outer ring raceway
- Suitable for simultaneously acting radial and axial loads
- Axial load capacity increases with increasing contact angle
compliances
- 0
| Series | 3220 |
| No. in Set | Single Bearing |
| O.D. | 47 mm |
| Seal Material | Synthetic Rubber w/Steel Reinforcement |
| Enclosure | Double Sealed |
| Ball Material | Steel |
| Special Features | Grease for Medium Temperatures |
| Temperature Range [Min] | -22 °F |
| Locking Device | No Locking Device |
| Seal Type | Contact Seals |
| Lubricant | Polyurea Base |
| Inner Ring Width | 0.88 in, 22.23 mm |
| Cage Material | Plastic |
| Bore Type | Round Bore |
| Snap Ring | No Snap Ring |
| Cage Type | Plastic |
| Precision Level | Standard (ABEC 1) |
| icNumber | 7696964 |
| Capacity | Standard Capacity |
| Inch/Metric | Metric Bore |
| Radial Internal Clearance | Normal |
| Rows of Balls | Double |
| Bearing Type | Angular Contact |
| Flush Ground | No |
| O.D. Type | Straight |
| Material | Steel |
| Outer Ring Width | 7/8 in |
| Precision | Standard |
| Radial Internal Clearance Specification | Normal Clearance |
| Contact Angle | 32° |
| Bearing Design | Converging Angle Design |
| Preload Level | None |
| I.D. | 17 mm |
| Temperature Range [Max] | 230 °F |
| Width | 22.225 mm |
| Weight | 0.415 LB |
| EAN or UPC | 7316570037845 |
