Find a Service Center
Alternate Products
- 45 mm ID x 85 mm OD x 19 mm Wide
- Single Shield (Non-Contact)
- ABEC 1
- Steel Cage
- C3 Clearance
applications
- Textiles
- Power tools
- Electric motors
- Pumps
- Gearboxes
features
- Deep, uninterrupted raceway
- Carries axial loads in both directions
- Carries radial loads at high speeds
compliances
- 0
| Bearing Type | Deep Groove |
| No. in Set | Single Bearing |
| Outer Ring Width | 0.75 in, 19 mm |
| Inch/Metric | Metric |
| icNumber | 7696379 |
| Seal Material | Tinplate |
| Bore Type | Cylindrical |
| O.D. | 3.35 in, 85 mm |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Ball Material | Steel |
| Preload Level | None |
| Bearing Design | Deep Groove Design |
| O.D. Type | Cylindrical |
| Seal Type | Non-Contacting Seal |
| Radial Internal Clearance | C3 |
| Limiting Speed - Grease | 7500 rpm |
| Locking Device | No Locking Device |
| Precision | Standard |
| Snap Ring | No Snap Ring |
| Cage Material | Bearing Steel |
| Origin | Single Row Radial |
| Rows of Balls | Single |
| Width | 0.75 in, 19 mm |
| Enclosure | Shield On One Side |
| Static Load Rating [Max] | 4860 lbf |
| Series | 62 |
| Inner Ring Width | 0.75 in, 19 mm |
| Lubricant | Oil Preservative |
| I.D. | 1.77 in, 45 mm |
| Pre Lubricant | None |
| Material | Bearing Steel |
| Limiting Speed - Oil | 9000 rpm |
| Contact Angle | 0° |
| Dynamic Load Rating | 7460 lbf |
| Cage Type | Metal |
| Limiting Speed - Sealed | 5000 rpm |
| Capacity | Standard Capacity |
| Precision Level | Standard (ABEC 1) |
| Weight | 0.937 LB |
| EAN or UPC | 7316576681202 |
