Find a Service Center
- 25 mm ID x 52 mm OD x 15 mm Wide
- Open
- ABEC 1
- Polyamide Cage
- Normal Clearance
description
- Angular contact ball bearings have raceways in the inner and outer rings, which are displaced with respect to each other in the direction of the bearing axis. Designed to accommodate both radial and axial loads (in one direction).
applications
- Pumps
- Compressors
- Centrifuges
features
- Inner and outer ring raceway
- Suitable for simultaneously acting radial and axial loads
- Axial load capacity increases with increasing contact angle
compliances
- In accordance with ISO 15-1981
| icNumber | 7695929 |
| Cage Material | Polyamide (Molded Nylon) |
| Bearing Type | Angular Contact |
| Preload Level | None |
| Rows of Balls | Single |
| Seal Type | Unsealed |
| Radial Internal Clearance | Normal |
| Bore Type | Round Bore |
| Inch/Metric | Metric Bore |
| Precision Level | Standard (ABEC 1) |
| Width | 0.59 in, 15 mm |
| Cage Type | Plastic |
| No. in Set | Single Bearing |
| Capacity | High Capacity |
| Seal Material | None |
| Series | 7200 |
| Radial Internal Clearance Specification | Normal Clearance |
| Inner Ring Width | 0.59 in, 15 mm |
| Limiting Speed - Oil | 15000 rpm |
| Enclosure | Open |
| Flush Ground | No |
| Precision | Standard |
| O.D. | 52 mm |
| Material | Steel |
| Outer Ring Width | 15 mm |
| Locking Device | No Locking Device |
| O.D. Type | Straight |
| I.D. | 25 mm |
| Ball Material | Steel |
| Snap Ring | No Snap Ring |
| Lubricant | Oil Preservative |
| Limiting Speed - Grease | 10000 rpm |
| Bearing Design | Single Row Angular Contact |
| Contact Angle | 40° |
| Weight | 0.291 LB |
| EAN or UPC | 7316576632686 |
