Find a Service Center
- Radial Shaft Seal
- 241.3 mm Shaft Diameter
- 273.05 mm Housing Bore Diameter
- 15.88 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Case Construction | Steel Case w/Inner Case |
| Shaft Dia. | 241.3 mm |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.093 |
| Surface Speed [Nom] | 5,000 ft/min |
| Temperature Range [Max] | 225 °F |
| Inch/Metric | Metric |
| Housing Bore Dia. | 273.05 mm |
| Spring Material | Carbon Steel Garter |
| Seal Application | General Purpose |
| Lip Style | Internal |
| Temperature Range [Min] | -40 °F |
| Seal Design | Bonded Design |
| Lip Type | Single Lip w/Spring |
| Lip Material | Nitrile |
| Construction | HDS2 |
| Cover/Compensation Ring/Plate Required | No |
| Pressure | 10 psi |
| Weight | 2.015 LB |
| EAN or UPC | 85311089531 |
