Find a Service Center
- Cam Follower
- 4 1/2" OD V-Groove Roller
- 1 1/4" Standard Stud
- 1 1/4-12 Thread
- Metal Plug End
description
- SMITH-TRAX® were designed for applications with a combination of both radial and axial loads. The SMITH-TRAX® bearings use tapered roller bearings or deep groove ball bearings to handle this combination of radial and thrust loads. This bearing system is considerably more effective at supporting axial loads than needle rollers found in standard cam followers. Special seals provide for use in contaminated environments. A metal expansion plug closes off the back end of the bearing to allow for a large lubrication reservoir.
| Thread Size | 1 1/4 |
| End Type | Metal Plug |
| Material | Steel |
| Roller Type | V-Groove |
| Stud Dia. | 1 1/4 in |
| Stud Length | 2 1/2 in |
| Threads per Inch | 12 |
| Thread Type | UNF |
| Enclosure | Sealed |
| Dynamic Load Rating | 14300 lbf |
| Roller Width | 2 in |
| Roller Dia. | 4 1/2 in |
| Stud Type | Standard |
| Bearing Type | Tapered Roller Bearing |
| Inch/Metric | Inch |
| Weight | 7.0 LB |
| EAN or UPC | 651041149366 |
