These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
NFPA Size
D03
Coil Type Code
U
Spool Indicator Switch Code
None
Pressure Port Check Valve Pressure
N/A
Solenoid Energization Code
V
Response Type
Standard Response
Center Position
All Ports Open
Port Restrictor Plugs
None
EN Code
None
Port Restrictor Plug Code
None
Surge Suppressor/Damper
None
Function Code
0
Valve Type
High-Performance
Pressure [Max]
5075 psi
Overrides
No Overrides
Port T Pressure Rating
3000 psi
Solenoid Code
H
Crossover
All Ports Open
Spool Code
0
Port T Code
7
Operation
Solenoid Operated
Electrical Options
None
Solenoid Indicator Lights Code
None
Indicator Lights
No
Actuator Type
Solenoid
Mechanical Options
None
Pilot Valve Type
N/A
Housing Code
None
Cycle Rate [Max]
N/A
Rated Flow [Max]
21 gal/min
AC/DC
DC
Coil Type
DIN 43650
Spool Spring Arrangement Code
BL
Solenoid
Single
Voltage & Frequency
24 VDC
Coil Rating Code
H
Electrical Connector Code
None
Spool Shift Timing
N/A
Manual Override Option Code
None
Reducer Module
N/A
Design No.
60
Electrical Connection
DIN 43650
Function
2-Position Spring Offset, End to Center
Pilot/Drain
None
Seal Material
Buna-N
Surge Suppressor/Damper Code
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
