These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Manual Override Option Code
None
Spool Indicator Switch Code
S5
AC/DC
DC
Pilot Valve Type
N/A
Pressure [Max]
5075 psi
Coil Rating Code
H
Electrical Connection
Wired Terminal Block
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Port Restrictor Plug Code
None
Center Position
All Ports Blocked
Seal Material
Buna-N
Response Type
Standard Response
Operation
Solenoid Operated
Function
2-Position Spring Offset, End to End
Actuator Type
Solenoid
Pressure Port Check Valve Pressure
N/A
Spool Code
2
Coil Type Code
F
Design No.
60
Port T Pressure Rating
150 psi
Voltage & Frequency
24 VDC
Electrical Connector Code
T
Reducer Module
N/A
Crossover
All Ports Blocked
Pilot/Drain
None
Overrides
No Overrides
Rated Flow [Max]
21 gal/min
Solenoid Energization Code
None
Solenoid Code
H
Function Code
2
Surge Suppressor/Damper
None
Indicator Lights
Yes
Valve Type
High-Performance
Cycle Rate [Max]
N/A
Spool Shift Timing
N/A
Electrical Options
None
EN Code
None
Mechanical Options
None
Surge Suppressor/Damper Code
None
NFPA Size
D03
Port T Code
2
Spool Spring Arrangement Code
A
Housing Code
W
Solenoid Indicator Lights Code
L
Solenoid
Single
Port Restrictor Plugs
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
