These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Function Code
2
Mechanical Options
None
Response Type
Standard Response
Valve Type
High-Performance
Coil Type Code
F
Housing Code
W
Port T Code
2
Pilot/Drain
None
Cycle Rate [Max]
N/A
Pressure Port Check Valve Pressure
N/A
Spool Shift Timing
N/A
Operation
Solenoid Operated
Seal Material
Buna-N
Overrides
No Overrides
Surge Suppressor/Damper
None
Electrical Connector Code
T
Voltage & Frequency
110/120 VAC – 50/60 Hz
Electrical Connection
Wired Terminal Block
Surge Suppressor/Damper Code
None
Function
2-Position Spring Offset, End to End
Crossover
All Ports Blocked
Pressure [Max]
5075 psi
Design No.
60
Spool Code
2
Manual Override Option Code
None
Electrical Options
None
Reducer Module
N/A
Coil Rating Code
B
Solenoid Indicator Lights Code
L
Rated Flow [Max]
21 gal/min
Port Restrictor Plug Code
None
Solenoid Energization Code
None
AC/DC
AC
Center Position
All Ports Blocked
Pilot Valve Type
N/A
Spool Spring Arrangement Code
AL
EN Code
None
Spool Indicator Switch Code
S5
Actuator Type
Solenoid
Port Restrictor Plugs
None
NFPA Size
D03
Solenoid Code
B
Solenoid
Single
Indicator Lights
Yes
Port T Pressure Rating
150 psi
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back