These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Coil Rating Code
B
Surge Suppressor/Damper Code
None
Spool Code
66
Port Restrictor Plug Code
None
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Spool Shift Timing
N/A
Pressure [Max]
5075 psi
Electrical Connector Code
T
Operation
Solenoid Operated
Solenoid Indicator Lights Code
L
Port T Code
6
Manual Override Option Code
None
Response Type
Standard Response
Actuator Type
Solenoid
Coil Type Code
F
Cycle Rate [Max]
N/A
Surge Suppressor/Damper
None
Function Code
66
Mechanical Options
None
Indicator Lights
Yes
Spool Indicator Switch Code
None
Seal Material
Buna-N
Pilot Valve Type
N/A
Reducer Module
N/A
Housing Code
W
Crossover
P Blocked, A or B to T
Rated Flow [Max]
21 gal/min
Center Position
P Blocked, A & B to T
Pressure Port Check Valve Pressure
N/A
Design No.
60
Solenoid Energization Code
None
Spool Spring Arrangement Code
C
Electrical Options
None
NFPA Size
D03
Electrical Connection
Wired Terminal Block
Voltage & Frequency
110/120 VAC – 50/60 Hz
Port T Pressure Rating
3000 psi
Function
3-Position Spring Centered
AC/DC
AC
Solenoid
Double
Overrides
No Overrides
Solenoid Code
B
EN Code
None
Pilot/Drain
None
Port Restrictor Plugs
None
Valve Type
High-Performance
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back