These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Manual Override Option Code
None
Port Restrictor Plugs
None
Coil Type Code
F
Spool Indicator Switch Code
None
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Pressure [Max]
5075 psi
Actuator Type
Solenoid
Reducer Module
N/A
Operation
Solenoid Operated
EN Code
None
Overrides
No Overrides
Electrical Options
None
Mechanical Options
None
Solenoid Code
HL
Design No.
61
Housing Code
W
Function
3-Position Spring Centered
Surge Suppressor/Damper
None
Cycle Rate [Max]
N/A
Rated Flow [Max]
21 gal/min
Solenoid
Double
Electrical Connection
Wired Terminal Block
Spool Code
8
Solenoid Indicator Lights Code
L
Spool Spring Arrangement Code
C
Seal Material
Buna-N
Electrical Connector Code
T
Port T Pressure Rating
3000 psi
Indicator Lights
Yes
Crossover
All Ports Open, Restricted
Pressure Port Check Valve Pressure
N/A
Pilot Valve Type
N/A
Coil Rating Code
HL
Valve Type
High-Performance
NFPA Size
D03
Port T Code
7
AC/DC
DC
Voltage & Frequency
24 VDC, Low Power Coil
Port Restrictor Plug Code
None
Function Code
8
Surge Suppressor/Damper Code
None
Solenoid Energization Code
V
Center Position
P to T, A & B Blocked
Pilot/Drain
None
Response Type
Standard Response
Spool Shift Timing
N/A
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back