These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Actuator Type
Solenoid
Solenoid Code
H
Overrides
No Overrides
Indicator Lights
No
Mechanical Options
None
Coil Type Code
U
EN Code
None
Coil Type
DIN 43650
Surge Suppressor/Damper
None
Operation
Solenoid Operated
Voltage & Frequency
24 VDC
Electrical Options
None
Port Restrictor Plugs
None
Crossover
All Ports Blocked
Surge Suppressor/Damper Code
None
Pilot Valve Type
N/A
Reducer Module
N/A
Spool Spring Arrangement Code
C
Rated Flow [Max]
21 gal/min
Electrical Connector Code
None
Port Restrictor Plug Code
None
Function
3-Position Spring Centered
Solenoid Energization Code
None
NFPA Size
D03
Function Code
2
AC/DC
DC
Center Position
All Ports Blocked
Solenoid Indicator Lights Code
None
Manual Override Option Code
Z
Port T Code
7
Solenoid
Double
Cycle Rate [Max]
N/A
Spool Indicator Switch Code
None
Pilot/Drain
None
Coil Rating Code
H
Port T Pressure Rating
3000 psi
Spool Code
2
Valve Type
High-Performance
Electrical Connection
DIN 43650
Pressure [Max]
5075 psi
Spool Shift Timing
N/A
Response Type
Standard Response
Housing Code
None
Seal Material
Buna-N
Pressure Port Check Valve Pressure
N/A
Design No.
60
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
