Find a Service Center
- Solenoid Actuated Valve
- Pilot Operated Operation
- D08 NFPA Size
- Double Solenoid
- 3-Position Spring Centered Function
description
- DG5V-8 models are two-stage directional control valves having an integrally-mounted wet armature solenoid pilot valve. These valves are generally used to control the movement of a work cylinder or the rotation of a fluid motor.
caution
- It is necessary to use a minimum of one flanged pulley to prevent the belt from riding off
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
| Manual Override Option Code | None |
| Electrical Connection | No Connector |
| Gauge Port | SAE-4 |
| Housing Code | W |
| Body Material | Gray Iron |
| Electrical Options | None |
| EN Code | None |
| Response Type | Standard Response |
| Response Type Code | None |
| Coil Type Code | F |
| Manual Override | Plain Override |
| Indicator Lights | No |
| Spool Control Modification Code | None |
| Spool Indicator Switch Code | None |
| Solenoid | Double |
| Port T Pressure Rating | 5000 psi |
| Pressure [Max] | 5000 psi |
| Reducer Module Code | None |
| Pilot/Drain | External Pilot/Internal Drain |
| Valve Type | Standard-Duty |
| No. of Stages | Two Stage |
| Tank Port Rating | 5000 |
| Actuator Type | Solenoid |
| Pressure Port Check Valve Pressure | N/A |
| Overrides | Plain Override Solenoid Ends |
| Solenoid Energization Code | None |
| Surge Suppressor/Damper Code | None |
| Model No. | DG5V-8-H-6C-M-FW-B-10 |
| Crossover | P Blocked, A or B to T |
| Port Restrictor Plug Code | None |
| Port Restrictor Plugs | None |
| Spool Code | 6 |
| Seal Material | Buna-N |
| Function | 3-Position Spring Centered |
| Center Position | P Blocked, A & B to T |
| Reducer Module | No |
| Operation | Pilot Operated |
| Design No. | 10 |
| Pilot Valve Type Code | H |
| Pilot Valve Type | CETOP 3, High Performance |
| Spool Center Condition | A Port and Double Offset sensing switch on B Port |
| Mounting | Subplate/Manifold Mount |
| NFPA Size | D08 |
| Gauge Port Thread Type | 7/16 - 20 UNF, SAE Thread |
| Spool Spring Arrangement Code | C |
| Pressure Port Check Valve Code | None |
| Coil Rating Code | B |
| Compatible Fluids | Petroleum Oil |
| Fluid Cleanliness | 19/17/14 micron |
| Surge Suppressor/Damper | None |
| Coil Type | Flying Leads, 1/2 in NPT Thread Wiring Housing |
| Pilot Drain Code | None |
| Rated Flow [Max] | 175 gal/min |
| Pilot Pressure Code | None |
| Electrical Connector Code | None |
| Voltage & Frequency | 110/120 VAC - 50/60 Hz |
| Mechanical Options Code | None |
| Performance | High Performance |
| Leakage | Standard Performance |
| AC/DC | AC |
| Gauge Ports Code | None |
| Mechanical Options | None |
| Electrical Options Code | None |
| Solenoid Indicator Lights Code | None |
| Weight | 35.0 LB |
