Find a Service Center
- Solenoid Actuated Valve
- Pilot Operated Operation
- D08 NFPA Size
- Double Solenoid
- 3-Position Spring Centered Function
description
- DG5V-8 models are two-stage directional control valves having an integrally-mounted wet armature solenoid pilot valve. These valves are generally used to control the movement of a work cylinder or the rotation of a fluid motor.
caution
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
| Pressure Port Check Valve Code | None |
| Temperature Range [Max] | 230 °F |
| Tank Port Rating | 5000 |
| NFPA Size | D08 |
| Pilot Valve Type Code | S |
| Mounting | Subplate/Manifold Mount |
| Coil Type | Flying Leads, 1/2 in NPT Thread Wiring Housing |
| Spool Code | 33 |
| Solenoid | Double |
| Housing Code | W |
| Valve Type | Standard-Duty |
| Pilot Valve Type | CETOP 3, Standard Performance |
| Compatible Fluids | Petroleum Oil |
| Coil Rating Code | B |
| Leakage | Standard Performance |
| Reducer Module Code | None |
| Surge Suppressor/Damper Code | None |
| Operation | Pilot Operated |
| Gauge Ports Code | None |
| Mechanical Options Code | None |
| Port Restrictor Plugs | None |
| Electrical Options | None |
| Actuation Identification | Solenoid A, Solenoid B |
| Solenoid Energization Code | None |
| Pilot/Drain | Internal Pilot/Internal Drain |
| Temperature Range [Min] | -40 °F |
| AC/DC | AC |
| Crossover | P Blocked, A or B to T |
| Pressure Port Check Valve Pressure | N/A |
| Actuator Type | Solenoid |
| Electrical Connection | No Connector |
| Gauge Port | SAE-4 |
| Electrical Options Code | None |
| Spool Control Modification Code | None |
| Surge Suppressor/Damper | None |
| Function | 3-Position Spring Centered |
| Port T Pressure Rating | 5000 psi |
| Solenoid Indicator Lights Code | None |
| Design No. | 10 |
| Overrides | Plain Override Solenoid Ends |
| Mechanical Options | None |
| Body Material | Ductile Iron |
| Response Type | Standard Response |
| Coil Type Code | F |
| EN Code | None |
| Spool Indicator Switch Code | None |
| Seal Material | Buna-N |
| Manual Override Option Code | None |
| Gauge Port Thread Type | 7/16 - 20 UNF, SAE Thread |
| Fluid Cleanliness | 19/17/14 micron |
| Electrical Connector Code | None |
| Rated Flow [Max] | 175 gal/min |
| Pilot Drain Code | T |
| No. of Stages | Two Stage |
| Center Position | P Blocked, A & B to T |
| Port Restrictor Plug Code | None |
| Manual Override | Plain Override |
| Reducer Module | No |
| Response Type Code | None |
| Model No. | DG5V-8-S-33C-T-M-FW-B-10 |
| Performance | Standard Performance |
| Pilot Pressure Code | None |
| Pressure [Max] | 5000 psi |
| Indicator Lights | No |
| Voltage & Frequency | 110/120 VAC - 50/60 Hz |
| Spool Spring Arrangement Code | C |
| Weight | 35.0 LB |
