These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Valve Type
High-Performance
Spool Shift Timing
N/A
Cycle Rate [Max]
N/A
NFPA Size
D03
Housing Code
None
Overrides
No Overrides
Manual Override Option Code
None
Center Position
P Blocked, A & B to T
Mechanical Options
None
Actuator Type
Solenoid
Coil Type
DIN 43650
Solenoid Code
H
Coil Type Code
U
Pilot Valve Type
N/A
Function Code
66
Pressure [Max]
5075 psi
Port T Code
7
Spool Code
66
Electrical Connection
DIN 43650
Rated Flow [Max]
21 gal/min
Operation
Solenoid Operated
Surge Suppressor/Damper Code
None
AC/DC
DC
Electrical Connector Code
None
Crossover
P Blocked, A or B to T
Spool Indicator Switch Code
None
Indicator Lights
No
Function
3-Position Spring Centered
Seal Material
Buna-N
Solenoid Indicator Lights Code
None
Solenoid Energization Code
None
Response Type
Standard Response
Voltage & Frequency
24 VDC
Design No.
60
Spool Spring Arrangement Code
C
Pressure Port Check Valve Pressure
N/A
Surge Suppressor/Damper
None
Electrical Options
None
Reducer Module
N/A
Coil Rating Code
H
Pilot/Drain
None
Port Restrictor Plug Code
None
Port Restrictor Plugs
None
EN Code
None
Solenoid
Double
Port T Pressure Rating
3000 psi
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
