Find a Service Center
- D05 Double Solenoid Operated Valve
- 220 VAC - 50 Hz
- Ground Terminal
- No Coil
- 3-Position Spring Centered
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Center Position | P Blocked, A & B to T |
| Electrical Options Code | None |
| Solenoid Air Gap Code | None |
| Design No. | 50 |
| Port T Pressure Rating | 1000 psi |
| Reducer Module | N/A |
| Electrical Connection | Ground Terminal |
| Pilot/Drain | None |
| Seal Material | Buna-N |
| Response Type | Standard Response |
| Valve Type | Standard-Duty |
| Electrical Options | None |
| Port Restrictor Plugs | None |
| AC/DC | AC |
| Operation | Solenoid Operated |
| Spool Spring Arrangement Code | C |
| Indicator Lights | No |
| Pressure [Max] | 3000 psi |
| NFPA Size | D05 |
| Actuator Type | Solenoid |
| Function | 3-Position Spring Centered |
| Pilot Valve Type | N/A |
| Rated Flow [Max] | 20 gal/min |
| Mechanical Options Code | None |
| Coil Rating Code | None |
| Mechanical Options | None |
| Cycle Rate [Max] | N/A |
| Surge Suppressor/Damper | None |
| Coil Type | No Coil |
| Pressure Port Check Valve Pressure | N/A |
| Flow Direction Code | 4 |
| Solenoid | Double |
| Spool Code | 6 |
| Crossover | P Blocked, A or B to T |
| Voltage & Frequency | 220 VAC – 50 Hz |
| Overrides | No Overrides |
| Weight | 10.0 LB |
