These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Design No.
60
Port T Code
7
Voltage & Frequency
24 VDC
Spool Shift Timing
N/A
Valve Type
High-Performance
Function
2-Position Spring Offset, End to Center
Function Code
0
Cycle Rate [Max]
N/A
Port Restrictor Plugs
None
Operation
Solenoid Operated
Coil Type
DIN 43650
Overrides
No Overrides
NFPA Size
D03
Electrical Connector Code
None
Coil Type Code
U
Rated Flow [Max]
21 gal/min
Solenoid
Single
Mechanical Options
None
Coil Rating Code
H
AC/DC
DC
Electrical Connection
DIN 43650
Pilot/Drain
None
Seal Material
Buna-N
Surge Suppressor/Damper Code
None
Response Type
Standard Response
Manual Override Option Code
None
Reducer Module
N/A
Pressure Port Check Valve Pressure
N/A
Solenoid Indicator Lights Code
None
Solenoid Code
H
Spool Spring Arrangement Code
B
Surge Suppressor/Damper
None
Electrical Options
None
EN Code
None
Spool Code
0
Port T Pressure Rating
3000 psi
Center Position
All Ports Open
Port Restrictor Plug Code
None
Crossover
All Ports Open
Actuator Type
Solenoid
Solenoid Energization Code
None
Pressure [Max]
5075 psi
Pilot Valve Type
N/A
Spool Indicator Switch Code
None
Housing Code
None
Indicator Lights
No
Weight
1.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
