These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Port T Pressure Rating
3000 psi
Pilot/Drain
None
Spool Code
2
Coil Type Code
U
Surge Suppressor/Damper
None
Solenoid
Single
Manual Override Option Code
None
Rated Flow [Max]
21 gal/min
Solenoid Code
G
Pressure [Max]
5075 psi
Spool Shift Timing
N/A
Housing Code
None
Cycle Rate [Max]
N/A
Coil Type
DIN 43650
Mechanical Options
None
Crossover
All Ports Blocked
Spool Indicator Switch Code
None
Surge Suppressor/Damper Code
None
NFPA Size
D03
Function
2-Position Spring Offset, End to End
Voltage & Frequency
12 VDC
Spool Spring Arrangement Code
A
EN Code
None
Pilot Valve Type
N/A
Center Position
All Ports Blocked
Reducer Module
N/A
Design No.
60
Solenoid Indicator Lights Code
None
Solenoid Energization Code
None
Actuator Type
Solenoid
Overrides
No Overrides
Valve Type
High-Performance
Electrical Connector Code
None
Electrical Options
None
Function Code
2
Port Restrictor Plug Code
None
Port T Code
7
Electrical Connection
DIN 43650
AC/DC
DC
Indicator Lights
No
Seal Material
Buna-N
Port Restrictor Plugs
None
Response Type
Standard Response
Coil Rating Code
G
Operation
Solenoid Operated
Pressure Port Check Valve Pressure
N/A
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
