These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Electrical Connector Code
None
Mechanical Options
None
Pressure [Max]
5075 psi
Solenoid
Single
Coil Type
DIN 43650
Spool Code
2
Crossover
All Ports Blocked
EN Code
None
Voltage & Frequency
110/120 VAC – 50/60 Hz
Pilot/Drain
None
Function Code
2
Solenoid Indicator Lights Code
None
Pilot Valve Type
N/A
Coil Rating Code
B
Center Position
All Ports Blocked
Function
2-Position Spring Offset, End to Center
Coil Type Code
U
Rated Flow [Max]
21 gal/min
Reducer Module
N/A
Electrical Connection
DIN 43650
AC/DC
AC
Operation
Solenoid Operated
Cycle Rate [Max]
N/A
Overrides
No Overrides
Response Type
Standard Response
Seal Material
Buna-N
Spool Shift Timing
N/A
Spool Spring Arrangement Code
B
Electrical Options
None
Pressure Port Check Valve Pressure
N/A
Housing Code
None
Surge Suppressor/Damper
None
Indicator Lights
No
Manual Override Option Code
None
Port Restrictor Plug Code
None
Surge Suppressor/Damper Code
None
Port T Pressure Rating
3000 psi
Spool Indicator Switch Code
None
NFPA Size
D03
Design No.
60
Actuator Type
Solenoid
Solenoid Code
B
Solenoid Energization Code
None
Valve Type
High-Performance
Port Restrictor Plugs
None
Port T Code
6
Weight
1.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
