These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Multi-fluid capability without the need to change seals
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Center Position
P Blocked, A & B to T
Spool Shift Timing
N/A
Voltage & Frequency
12 VDC
Reducer Module
N/A
Function
3-Position Spring Centered
Overrides
No Overrides
Manual Override Option Code
H
Solenoid Indicator Lights Code
None
Solenoid Energization Code
None
Response Type
Standard Response
Actuator Type
Solenoid
Solenoid
Double
Spool Code
6
Surge Suppressor/Damper Code
None
Pilot/Drain
None
Port T Code
7
Electrical Connector Code
None
NFPA Size
D03
Coil Type
DIN 43650
Seal Material
Buna-N
Design No.
60
EN Code
None
Crossover
P Blocked, A or B to T
Operation
Solenoid Operated
Pressure Port Check Valve Pressure
N/A
Coil Rating Code
G
Valve Type
High-Performance
Pilot Valve Type
N/A
Cycle Rate [Max]
N/A
Port T Pressure Rating
3000 psi
Function Code
6
Electrical Options
None
Port Restrictor Plugs
None
AC/DC
DC
Solenoid Code
G
Spool Indicator Switch Code
None
Pressure [Max]
5075 psi
Coil Type Code
U
Housing Code
None
Surge Suppressor/Damper
None
Electrical Connection
DIN 43650
Port Restrictor Plug Code
None
Spool Spring Arrangement Code
C
Indicator Lights
No
Mechanical Options
None
Rated Flow [Max]
21 gal/min
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
