RFWA726-100-B5-G

700 Series C-Face Coupled Double Reduction Parallel Reducer

Item #101871342

Universal, Parallel Worm Position

No Lubricant

Cast Iron

+ Show More

Auto Replenish

each One-time purchase

Product Details

Large oil reservoir provides efficient heat dissipation and lubrication for longer life
Housing is straddle milled top and bottom for precise alignment
Internal baffles ensure positive, leak-free venting
Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
High strength steel output shaft ensures capacity for high torque
Pipe plugs allow easy fill, level and drain in any mounting position
Super finished oil seal diameters on both input and output shafts extend seal life

Polycarbonate bowls should not be exposed to chlorinated hydro-carbons, ketones, esters and certain alcohols
Cannot be used in air systems where compressors are lubricated with fire-resistant fluids, such as phosphate ester and di-ester types
Polycarbonate bowls, being transparent and tough, are ideal for use with filters and lubricators. They are suitable for use in normal industrial environments, but should not be located in areas where they could be subjected to direct sunlight, an impact

Specifications

Thermal Input Horsepower @ 1750 RPM	N/A
Max. Thrust Load @ 1150 rpm	900 lb/in
Keyway Size	3/16 x 3/32
Bolt Center	6 3/8 in x 3 3/8 in
Washdown Duty	No
Box Height	8 in
Torque Out @ 1750 rpm	1785 in lb
Bolt Centers w/ Std. Base Kit (in)	8 x 5 1/4
Lubrication	None
Base to Shaft Center Height w/Vert. "J" Base Kit	4.75 in
Box Width	6 in
Family Name	RFWA
Base to Shaft Center Height w/High Vert. Base Kit	5.59 in
Reduction Type	Double Reduction
Shaft Assembly Code	G
Torque Out @ 1150 rpm	N/A
Worm Position	Universal¦Parallel
Output Configuration	Left Output
Motor Application	General Purpose
Box Length	11 21/32 in
Bolt Centers w/ Vertical "J" Base Kit (in)	10.38 x 3.13
Motor HP	3/4 hp
Base to Centerline of Input Shaft	3 25/32 in
Input (Shaft or Bore) Size	5/8 in
Housing Material	Cast Iron
Base to Shaft Center Height w/Std. Base Kit	5.81 in
Base to Shaft Center Height w/Low Vert. Base Kit	3.63 in
Bolt Centers w/ Vertical Base Kits (in)	10.13 x 5.75
Input Configuration	C-Face Coupled
Output RPM @ 1750 rpm Input	17.5 rpm
Bore Code	B5
Fan Cooled	No
HP @ RPM	0.75 hp @ 1800 rpm
Base to Centerline of Output Shaft	5 1/16 in
Frame	56C
Ratio	100:1
Frame Size	56C
Output (Shaft or Bore) Size	1 1/8 in
Center Distance	2 5/8 in
Max. Overhung Load @ 1750 rpm	1000 lb/in
Weight	63.1 LB
EAN or UPC	781711530405