RFWA726-100-B5-G

700 Series C-Face Coupled Double Reduction Parallel Reducer

Item #101871342

Universal, Parallel Worm Position

No Lubricant

Cast Iron

+ Show More

Auto Replenish

each One-time purchase

Product Details

Large oil reservoir provides efficient heat dissipation and lubrication for longer life
Housing is straddle milled top and bottom for precise alignment
Internal baffles ensure positive, leak-free venting
Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
High strength steel output shaft ensures capacity for high torque
Pipe plugs allow easy fill, level and drain in any mounting position
Super finished oil seal diameters on both input and output shafts extend seal life

Polycarbonate bowls should not be exposed to chlorinated hydro-carbons, ketones, esters and certain alcohols
Cannot be used in air systems where compressors are lubricated with fire-resistant fluids, such as phosphate ester and di-ester types
Polycarbonate bowls, being transparent and tough, are ideal for use with filters and lubricators. They are suitable for use in normal industrial environments, but should not be located in areas where they could be subjected to direct sunlight, an impact

Specifications

Box Width	6 in
Torque Out @ 1150 rpm	N/A
Keyway Size	3/16 x 3/32
Output RPM @ 1750 rpm Input	17.5 rpm
Output (Shaft or Bore) Size	1 1/8 in
Reduction Type	Double Reduction
HP @ RPM	0.75 hp @ 1800 rpm
Max. Overhung Load @ 1750 rpm	1000 lb/in
Base to Centerline of Output Shaft	5 1/16 in
Center Distance	2 5/8 in
Frame Size	56C
Box Height	8 in
Input Configuration	C-Face Coupled
Washdown Duty	No
Bolt Center	6 3/8 in x 3 3/8 in
Base to Shaft Center Height w/Low Vert. Base Kit	3.63 in
Motor HP	3/4 hp
Motor Application	General Purpose
Lubrication	None
Input (Shaft or Bore) Size	5/8 in
Torque Out @ 1750 rpm	1785 in lb
Bolt Centers w/ Std. Base Kit (in)	8 x 5 1/4
Base to Shaft Center Height w/Std. Base Kit	5.81 in
Family Name	RFWA
Housing Material	Cast Iron
Bolt Centers w/ Vertical Base Kits (in)	10.13 x 5.75
Ratio	100:1
Frame	56C
Max. Thrust Load @ 1150 rpm	900 lb/in
Bolt Centers w/ Vertical "J" Base Kit (in)	10.38 x 3.13
Base to Shaft Center Height w/High Vert. Base Kit	5.59 in
Base to Shaft Center Height w/Vert. "J" Base Kit	4.75 in
Shaft Assembly Code	G
Box Length	11 21/32 in
Bore Code	B5
Output Configuration	Left Output
Base to Centerline of Input Shaft	3 25/32 in
Fan Cooled	No
Worm Position	Universal¦Parallel
Thermal Input Horsepower @ 1750 RPM	N/A
Weight	63.1 LB
EAN or UPC	781711530405