RFWC760-150E-B9-G

700 Series C-Face Coupled Double Reduction Right Angle Reducer

Item #101871432

Universal, Right Angle Worm Position

No Lubricant

Cast Iron

+ Show More

Auto Replenish

each One-time purchase

Product Details

Large oil reservoir provides efficient heat dissipation and lubrication for longer life
Housing is straddle milled top and bottom for precise alignment
Internal baffles ensure positive, leak-free venting
Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
High strength steel output shaft ensures capacity for high torque
Pipe plugs allow easy fill, level and drain in any mounting position
Super finished oil seal diameters on both input and output shafts extend seal life

Polycarbonate bowls, being transparent and tough, are ideal for use with filters and lubricators. They are suitable for use in normal industrial environments, but should not be located in areas where they could be subjected to direct sunlight, an impact

Specifications

Output RPM @ 1750 rpm Input	11.67 rpm
Bolt Center	12 3/4" x 6 3/8"
Box Length	10 7/8 in
Torque Out @ 1150 rpm	N/A
Bolt Centers w/ Std. Base Kit (in)	16 1/2 x 9 1/2
Base to Shaft Center Height w/Low Vert. Base Kit	7.31 in
Keyway Size	1/4 x 1/8
Box Height	16 1/2 in
Housing Material	Cast Iron
Bolt Centers w/ Vertical Base Kits (in)	20.88 x 11.75
Washdown Duty	No
Family Name	RFWC
Max. Overhung Load @ 1750 rpm	2400 lb/in
Base to Shaft Center Height w/High Vert. Base Kit	9.63 in
Motor HP	5 hp
Frame Size	180TC, 210C
Center Distance	6 in
Reduction Type	Double Reduction
Input Configuration	C-Face Coupled
Worm Position	Universal¦Right Angle
Ratio	150:1
Frame	180TC, 210C
Lubrication	None
Bore Code	B9
Thermal Input Horsepower @ 1750 RPM	N/A
Base to Centerline of Output Shaft	6 1/2 in
Fan Cooled	No
Motor Application	General Purpose
Box Width	19 1/8 in
Shaft Assembly Code	G
HP @ RPM	5 hp @ 1800 rpm
Base to Centerline of Input Shaft	N/A
Output Configuration	Left Output
Input (Shaft or Bore) Size	1 1/8 in
Torque Out @ 1750 rpm	17000 in lb
Output (Shaft or Bore) Size	2 1/4 in
Base to Shaft Center Height w/Std. Base Kit	7 3/4 in
Max. Thrust Load @ 1150 rpm	2100 lb/in
Weight	341.1 LB
EAN or UPC	781711531471