RFWC760-150E-B9-G

700 Series C-Face Coupled Double Reduction Right Angle Reducer

Item #101871432

Universal, Right Angle Worm Position

No Lubricant

Cast Iron

+ Show More

Auto Replenish

each One-time purchase

Product Details

Large oil reservoir provides efficient heat dissipation and lubrication for longer life
Housing is straddle milled top and bottom for precise alignment
Internal baffles ensure positive, leak-free venting
Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
High strength steel output shaft ensures capacity for high torque
Pipe plugs allow easy fill, level and drain in any mounting position
Super finished oil seal diameters on both input and output shafts extend seal life

Polycarbonate bowls, being transparent and tough, are ideal for use with filters and lubricators. They are suitable for use in normal industrial environments, but should not be located in areas where they could be subjected to direct sunlight, an impact

Specifications

Torque Out @ 1150 rpm	N/A
Base to Shaft Center Height w/Std. Base Kit	7 3/4 in
Frame	180TC, 210C
Lubrication	None
Washdown Duty	No
Base to Centerline of Input Shaft	N/A
Worm Position	Universal¦Right Angle
Torque Out @ 1750 rpm	17000 in lb
Box Length	10 7/8 in
Output Configuration	Left Output
Output (Shaft or Bore) Size	2 1/4 in
Bore Code	B9
Base to Shaft Center Height w/High Vert. Base Kit	9.63 in
Motor Application	General Purpose
Ratio	150:1
Output RPM @ 1750 rpm Input	11.67 rpm
Bolt Centers w/ Vertical Base Kits (in)	20.88 x 11.75
Input Configuration	C-Face Coupled
Center Distance	6 in
Box Width	19 1/8 in
Base to Centerline of Output Shaft	6 1/2 in
Frame Size	180TC, 210C
Keyway Size	1/4 x 1/8
Fan Cooled	No
Base to Shaft Center Height w/Low Vert. Base Kit	7.31 in
Reduction Type	Double Reduction
Max. Overhung Load @ 1750 rpm	2400 lb/in
Bolt Center	12 3/4" x 6 3/8"
Housing Material	Cast Iron
Input (Shaft or Bore) Size	1 1/8 in
Family Name	RFWC
Shaft Assembly Code	G
Box Height	16 1/2 in
Motor HP	5 hp
HP @ RPM	5 hp @ 1800 rpm
Thermal Input Horsepower @ 1750 RPM	N/A
Max. Thrust Load @ 1150 rpm	2100 lb/in
Bolt Centers w/ Std. Base Kit (in)	16 1/2 x 9 1/2
Weight	341.1 LB
EAN or UPC	781711531471