Find a Service Center
Alternate Products
- Finished Steel Gear
- 20 Diametral Pitch
- 20.0° Pressure Angle
- 40 Teeth
- 2" Pitch Diameter
description
- Spur gears are designed to transmit motion and power between parallel shafts. Configurations include spur, rack, pinion wire, stem pinions, and internal gears
- most with a selection of bores, keyways, and setscrews. Fine-pitch gears are available in plastic, brass, stainless steel, and steel. Heavier pitch spurs are available in steel and cast iron. Styles include plain, web, web with lightening holes, or spoked. Change gears have consecutive numbers of teeth for a variety of ratios.
features
- Parallel shaft applications
- Base oil viscosity: 500 SUS @ 100 °F
- More cost effective, quieter running and metallic options
- Four ball wear test 40 kg: 63 mm
- Reliability from steel, cast iron and brass
| Hardened Teeth | Without Hardened Teeth |
| Bore Type | Finished |
| Diametral Pitch | 20 |
| Torque at 900 RPM | 111 lb/in |
| Torque at 1800 RPM | 77 lb/in |
| Material | Steel |
| Pressure Angle | 20 ° |
| Length Through Bore | 1 in |
| Pitch Diameter | 2 in |
| Origin | Finished Bore |
| Keyway | w/Setscrew |
| Torque at 200 RPM | 168 lb/in |
| Torque at 600 RPM | 130 lb/in |
| Hub Dia. | 1.72 in |
| Bore Size | 0.75 in |
| Set Screw Size | 3/4 |
| Set Screw | Yes |
| Torque at 1200 RPM | 96.6 lb/in |
| Outside Dia. | 2.1 in |
| Torque at 300 RPM | 157 lb/in |
| No. of Teeth | 40 |
| Weight | 0.751 LB |
| EAN or UPC | 781711461402 |
