Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 4.5 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Duty | Standard-Duty |
| Flow Rate | 15 gal/min |
| Output Torque at Rated PSI (inch/pounds) | 1044 in lb |
| Splines | 6 |
| Special Features Assembly Code | 0 |
| Paint Code | A |
| Series | H Series |
| Special Features | None |
| Flow [Max] | 15 gal/min |
| Mounting Type Code | B |
| Shaft Type | Splined |
| Pilot Diameter | 1.75 in |
| Corrosion Resistant | No |
| Port Size | 1/2, 1/2-14 |
| Port Code | B |
| Case Drain | None |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Mount Type | 4 Bolt |
| Special Features Hardware Code | 00 |
| Flange Orientation | Standard |
| Port Size & Location | 1/2 in NPTF Side |
| Shaft Size & Type | 1 in - 6T Spline |
| Maximum Speed @ Continuous Flow | 760 rpm @ 15 gal/min |
| Motor Type | Spool Valve |
| Seal Material | Buna-N |
| Motor Element | Gerotor |
| Material | Cast Iron |
| Output Shaft Code | 02 |
| Displacement (in³/rev) | 4.5 |
| Inlet Pressure [Max] | 2500 psi |
| Port Type | NPTF |
| Port Location | Side Port |
| Bolt Circle Dia. | 3 1/4 in |
| Rotation | Standard Rotation |
| Mounting Hole Size | 3/8 in |
| Mounting Holes | 3/8-16 |
| RPM [Max] | 760 rpm |
| Pressure [Max] | 1800 psi |
| Case Drain Code | 0 |
| Weight | 11.5 LB |
