Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 5.9 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Duty | Standard-Duty |
| Bolt Circle Dia. | 3 1/4 in |
| Port Type | SAE O-Ring |
| Displacement (in³/rev) | 5.9 |
| Port Size | SAE-10, 7/8-14 UNF |
| Pilot Diameter | 1.75 in |
| Case Drain Code | 0 |
| Inlet Pressure [Max] | 2500 psi |
| Mounting Hole Size | 3/8 in |
| Mounting Type Code | B |
| Special Features Hardware Code | 00 |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Shaft Type | Splined |
| Port Size & Location | SAE-10 Side |
| Maximum Speed @ Continuous Flow | 585 rpm @ 15 gal/min |
| Mount Type | 4 Bolt |
| Splines | 6 |
| Flow [Max] | 15 gal/min |
| Seal Material | Buna-N |
| Motor Type | Spool Valve |
| Flow Rate | 15 gal/min |
| Series | H Series |
| Case Drain | None |
| RPM [Max] | 585 rpm |
| Rotation | Standard Rotation |
| Port Location | Side Port |
| Pressure [Max] | 1800 psi |
| Mounting Holes | 3/8-16 |
| Material | Cast Iron |
| Port Code | A |
| Motor Element | Gerotor |
| Shaft Size & Type | 1 in - 6T Spline |
| Special Features | None |
| Corrosion Resistant | No |
| Flange Orientation | Standard |
| RPM [Min] | 585 rpm |
| Output Torque at Rated PSI (inch/pounds) | 1368 in lb |
| Special Features Assembly Code | 0 |
| Output Shaft Code | 02 |
| Paint Code | A |
| Weight | 11.8 LB |
