Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 5.9 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Shaft Type | Splined |
| Motor Element | Gerotor |
| RPM [Max] | 585 rpm |
| Seal Material | Buna-N |
| Port Size & Location | SAE-10 Side |
| Corrosion Resistant | No |
| Mounting Type Code | B |
| Pilot Diameter | 1.75 in |
| Output Shaft Code | 02 |
| Mounting Holes | 3/8-16 |
| Splines | 6 |
| Special Features Hardware Code | 00 |
| Flow [Max] | 15 gal/min |
| Special Features | None |
| Motor Type | Spool Valve |
| Case Drain Code | 0 |
| Rotation | Standard Rotation |
| Port Size | SAE-10, 7/8-14 UNF |
| Special Features Assembly Code | 0 |
| Port Location | Side Port |
| Maximum Speed @ Continuous Flow | 585 rpm @ 15 gal/min |
| Bolt Circle Dia. | 3 1/4 in |
| Shaft Size & Type | 1 in - 6T Spline |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Output Torque at Rated PSI (inch/pounds) | 1368 in lb |
| Mount Type | 4 Bolt |
| Duty | Standard-Duty |
| Flow Rate | 15 gal/min |
| Paint Code | A |
| Displacement (in³/rev) | 5.9 |
| Mounting Hole Size | 3/8 in |
| Port Code | A |
| Series | H Series |
| RPM [Min] | 585 rpm |
| Port Type | SAE O-Ring |
| Case Drain | None |
| Flange Orientation | Standard |
| Inlet Pressure [Max] | 2500 psi |
| Pressure [Max] | 1800 psi |
| Material | Cast Iron |
| Weight | 11.8 LB |
