Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 4.5 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Pilot Diameter | 3.25 in |
| Material | Cast Iron |
| Port Code | B |
| Series | H Series |
| Mounting Type Code | A |
| Motor Element | Gerotor |
| Paint Code | A |
| Mount Type | 2 Bolt |
| Corrosion Resistant | No |
| Splines | 6 |
| Port Size | 1/2, 1/2-14 |
| Rotation | Standard Rotation |
| Special Features | None |
| Case Drain Code | 0 |
| Flange Orientation | Standard |
| Output Torque at Rated PSI (inch/pounds) | 1044 in lb |
| Seal Material | Buna-N |
| Special Features Hardware Code | 00 |
| Output Shaft Code | 02 |
| Port Type | NPTF |
| Port Location | Side Port |
| Flow [Max] | 15 gal/min |
| Shaft Size & Type | 1 in - 6T Spline |
| Case Drain | None |
| Pressure [Max] | 1800 psi |
| Duty | Standard-Duty |
| Motor Type | Spool Valve |
| RPM [Max] | 760 rpm |
| Maximum Speed @ Continuous Flow | 760 rpm @ 15 gal/min |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Shaft Type | Splined |
| Displacement (in³/rev) | 4.5 |
| Mounting Holes | 0.535 in |
| RPM [Min] | 760 rpm |
| Special Features Assembly Code | 0 |
| Inlet Pressure [Max] | 2500 psi |
| Mounting Hole Size | 0.535 in |
| Port Size & Location | 1/2 in NPTF Side |
| Flow Rate | 15 gal/min |
| Bolt Circle Dia. | 4.19 in |
| Weight | 11.5 LB |
