Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 4.5 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Displacement (in³/rev) | 4.5 |
| Maximum Speed @ Continuous Flow | 760 rpm @ 15 gal/min |
| Output Shaft Code | 02 |
| Material | Cast Iron |
| Mount Type | 2 Bolt |
| Port Size | 1/2, 1/2-14 |
| Splines | 6 |
| RPM [Max] | 760 rpm |
| Flow [Max] | 15 gal/min |
| Pressure [Max] | 1800 psi |
| Special Features Assembly Code | 0 |
| Port Type | NPTF |
| Motor Type | Spool Valve |
| Mounting Hole Size | 0.535 in |
| Mounting Type Code | A |
| Paint Code | A |
| Series | H Series |
| Port Code | B |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Inlet Pressure [Max] | 2500 psi |
| Flow Rate | 15 gal/min |
| Case Drain Code | 0 |
| Flange Orientation | Standard |
| Corrosion Resistant | No |
| Port Size & Location | 1/2 in NPTF Side |
| Seal Material | Buna-N |
| Special Features | None |
| Rotation | Standard Rotation |
| Shaft Size & Type | 1 in - 6T Spline |
| RPM [Min] | 760 rpm |
| Output Torque at Rated PSI (inch/pounds) | 1044 in lb |
| Bolt Circle Dia. | 4.19 in |
| Shaft Type | Splined |
| Duty | Standard-Duty |
| Pilot Diameter | 3.25 in |
| Mounting Holes | 0.535 in |
| Case Drain | None |
| Special Features Hardware Code | 00 |
| Port Location | Side Port |
| Motor Element | Gerotor |
| Weight | 11.5 LB |
