
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 11.3 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
Port Size | SAE-10, 7/8-14 UNF |
Paint/Packaging | Low Gloss Black, Individual Box |
Flange Orientation | Standard |
RPM [Min] | 304 rpm |
Motor Element | Gerotor |
Bolt Circle Dia. | 4.19 in |
Output Shaft Code | 02 |
Series | H Series |
Shaft Size & Type | 1 in - 6T Spline |
Port Location | Side Port |
Flow [Max] | 15 gal/min |
Splines | 6 |
Special Features Hardware Code | 00 |
Displacement (in³/rev) | 11.3 |
Pilot Diameter | 3.25 in |
Port Code | A |
Maximum Speed @ Continuous Flow | 304 rpm @ 15 gal/min |
Port Size & Location | SAE-10 Side |
Duty | Standard-Duty |
Port Type | SAE O-Ring |
Pressure [Max] | 1600 psi |
RPM [Max] | 304 rpm |
Mount Type | 2 Bolt |
Paint Code | A |
Rotation | Standard Rotation |
Mounting Type Code | A |
Motor Type | Spool Valve |
Output Torque at Rated PSI (inch/pounds) | 2345.45 in lb |
Special Features Assembly Code | 0 |
Seal Material | Buna-N |
Case Drain Code | 0 |
Flow Rate | 15 gal/min |
Case Drain | None |
Material | Cast Iron |
Mounting Holes | 0.535 in |
Mounting Hole Size | 0.535 in |
Special Features | None |
Corrosion Resistant | No |
Inlet Pressure [Max] | 2500 psi |
Shaft Type | Splined |
Weight | 12.8 LB |
