Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 11.3 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Port Size & Location | SAE-10 Side |
| Motor Type | Spool Valve |
| Flow [Max] | 15 gal/min |
| Pressure [Max] | 1600 psi |
| Duty | Standard-Duty |
| Port Location | Side Port |
| Displacement (in³/rev) | 11.3 |
| Rotation | Standard Rotation |
| Port Code | A |
| Special Features Hardware Code | 00 |
| Material | Cast Iron |
| Output Shaft Code | 02 |
| Series | H Series |
| Special Features | None |
| RPM [Min] | 304 rpm |
| Mounting Type Code | A |
| Mounting Holes | 0.535 in |
| Case Drain Code | 0 |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Paint Code | A |
| Case Drain | None |
| RPM [Max] | 304 rpm |
| Maximum Speed @ Continuous Flow | 304 rpm @ 15 gal/min |
| Flange Orientation | Standard |
| Pilot Diameter | 3.25 in |
| Shaft Type | Splined |
| Mounting Hole Size | 0.535 in |
| Splines | 6 |
| Mount Type | 2 Bolt |
| Corrosion Resistant | No |
| Seal Material | Buna-N |
| Shaft Size & Type | 1 in - 6T Spline |
| Port Size | SAE-10, 7/8-14 UNF |
| Output Torque at Rated PSI (inch/pounds) | 2345.45 in lb |
| Motor Element | Gerotor |
| Inlet Pressure [Max] | 2500 psi |
| Bolt Circle Dia. | 4.19 in |
| Port Type | SAE O-Ring |
| Flow Rate | 15 gal/min |
| Special Features Assembly Code | 0 |
| Weight | 12.8 LB |
