Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 2.8 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Port Location | Side Port |
| Pilot Diameter | 3.25 in |
| Maximum Speed @ Continuous Flow | 969 rpm @ 12 gal/min |
| Splines | 0 |
| Output Shaft Code | 01 |
| Displacement (in³/rev) | 2.8 |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Paint Code | A |
| Shaft Type | Straight w/ Woodruff Key |
| Flange Orientation | Standard |
| Corrosion Resistant | No |
| Inlet Pressure [Max] | 2500 psi |
| Material | Cast Iron |
| Mounting Hole Size | 0.535 in |
| Output Torque at Rated PSI (inch/pounds) | 646.1 in lb |
| Flow Rate | 12 gal/min |
| Bolt Circle Dia. | 4.19 in |
| Port Size | 1/2, 1/2-14 |
| Port Type | NPTF |
| Case Drain | 0.4375-20 UNF-2B SAE O-Ring Port (End Cap) |
| RPM [Max] | 969 rpm |
| Motor Type | Spool Valve |
| Pressure [Max] | 1800 psi |
| RPM [Min] | 969 rpm |
| Flow [Max] | 12 gal/min |
| Seal Material | Buna-N |
| Mount Type | 2 Bolt |
| Case Drain Code | 1 |
| Special Features Assembly Code | 0 |
| Duty | Standard-Duty |
| Mounting Type Code | A |
| Rotation | Standard Rotation |
| Mounting Holes | 0.535 in |
| Port Size & Location | 1/2 in NPTF Side |
| Series | H Series |
| Special Features Hardware Code | 00 |
| Motor Element | Gerotor |
| Special Features | None |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Port Code | B |
| Weight | 13.0 LB |
