Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- Port
- 4.52 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Case Drain | None |
| RPM [Max] | 760 rpm |
| Pressure [Max] | 1800 psi |
| Shaft Type | Straight w/ Woodruff Key |
| Port Type | NPTF |
| Maximum Speed @ Continuous Flow | 760 rpm @ 15 gal/min |
| Corrosion Resistant | No |
| Duty | Standard-Duty |
| Port Location | Side Port |
| Output Torque at Rated PSI (inch/pounds) | 1044 in lb |
| Port Size | 1/2 |
| Series | H Series |
| Mount Type | 2 Bolt |
| Seal Material | Buna-N |
| Special Features | Flange Rotated 90° |
| Special Features Hardware Code | 00 |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Pilot Diameter | 3.25 in |
| Material | Cast Iron |
| Case Drain Code | 0 |
| Mounting Holes | 0.535 in |
| Port Size & Location | 1/2 in NPTF Side |
| Flow [Max] | 15 gal/min |
| Mounting Hole Size | 0.565 in |
| Output Shaft Code | 01 |
| Displacement (in³/rev) | 4.52 |
| Port Code | B |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Bolt Circle Dia. | 4.187 in |
| Motor Element | Gerotor |
| Flow Rate | 57 lpm |
| Splines | 0 |
| Motor Type | Spool Valve |
| Rotation | Standard Rotation |
| Special Features Assembly Code | 2 |
| Paint Code | A |
| Inlet Pressure [Max] | 2500 psi |
| RPM [Min] | 760 rpm |
| Mounting Type Code | A |
| Flange Orientation | Flange Rotated 90° |
| Weight | 13.0 LB |
