Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 4.5 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Special Features | Free Running Gerotor |
| RPM [Min] | 760 rpm |
| Mount Type | 2 Bolt |
| Geroter/Geroler Options | Free Running |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Maximum Speed @ Continuous Flow | 760 rpm @ 15 gal/min |
| Mounting Holes | 0.535 in |
| Port Type | NPTF |
| Duty | Standard-Duty |
| Shaft Type | Straight w/ Woodruff Key |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Splines | 0 |
| Port Size | 1/2, 1/2-14 |
| Output Torque at Rated PSI (inch/pounds) | 1044 in lb |
| Case Drain | None |
| Displacement (in³/rev) | 4.5 |
| Case Drain Code | 0 |
| Port Code | B |
| Corrosion Resistant | No |
| Seal Material | Buna-N |
| Mounting Hole Size | 0.535 in |
| Port Size & Location | 1/2 in NPTF Side |
| Motor Type | Spool Valve |
| Motor Element | Gerotor |
| Paint Code | A |
| Port Location | Side Port |
| Pressure [Max] | 1800 psi |
| Mounting Type Code | A |
| Rotation | Standard Rotation |
| RPM [Max] | 760 rpm |
| Output Shaft Code | 01 |
| Series | H Series |
| Bolt Circle Dia. | 4.19 in |
| Material | Cast Iron |
| Flange Orientation | Standard |
| Special Features Assembly Code | 0 |
| Special Features Hardware Code | AA |
| Flow Rate | 15 gal/min |
| Flow [Max] | 15 gal/min |
| Inlet Pressure [Max] | 2500 psi |
| Pilot Diameter | 3.25 in |
| Weight | 13.0 LB |
