Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 4.5 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Inlet Pressure [Max] | 2500 psi |
| RPM [Max] | 760 rpm |
| Port Type | NPTF |
| Maximum Speed @ Continuous Flow | 760 rpm @ 15 gal/min |
| Material | Cast Iron |
| Port Code | B |
| Case Drain Code | 0 |
| Shaft Type | Straight w/ Woodruff Key |
| Mounting Type Code | A |
| RPM [Min] | 760 rpm |
| Pilot Diameter | 3.25 in |
| Special Features Assembly Code | 0 |
| Series | H Series |
| Case Drain | None |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Output Torque at Rated PSI (inch/pounds) | 1044 in lb |
| Mount Type | 2 Bolt |
| Port Size & Location | 1/2 in NPTF Side |
| Flange Orientation | Standard |
| Flow Rate | 15 gal/min |
| Pressure [Max] | 1800 psi |
| Duty | Standard-Duty |
| Mounting Holes | 0.535 in |
| Mounting Hole Size | 0.535 in |
| Rotation | Standard Rotation |
| Motor Type | Spool Valve |
| Special Features | Free Running Gerotor |
| Corrosion Resistant | No |
| Port Size | 1/2, 1/2-14 |
| Motor Element | Gerotor |
| Bolt Circle Dia. | 4.19 in |
| Splines | 0 |
| Flow [Max] | 15 gal/min |
| Output Shaft Code | 01 |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Geroter/Geroler Options | Free Running |
| Paint Code | A |
| Port Location | Side Port |
| Special Features Hardware Code | AA |
| Displacement (in³/rev) | 4.5 |
| Seal Material | Buna-N |
| Weight | 13.0 LB |
