Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2 NPTF Port
- 14.1 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Special Features Assembly Code | 0 |
| Port Size & Location | 1/2 in NPTF Side |
| Motor Element | Gerotor |
| Rotation | Standard Rotation |
| Displacement (in³/rev) | 14.1 |
| Corrosion Resistant | No |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Mount Type | 2 Bolt |
| RPM [Min] | 243 rpm |
| Shaft Type | Straight w/ Woodruff Key |
| Port Size | 1/2 |
| Port Type | NPTF |
| Pilot Diameter | 3.25 in |
| Material | Cast Iron |
| Port Code | B |
| Inlet Pressure [Max] | 2500 psi |
| Pressure [Max] | 1450 psi |
| Paint Code | A |
| Motor Type | Spool Valve |
| Special Features | Free Running Gerotor |
| Flow [Max] | 15 gal/min |
| Special Features Hardware Code | AA |
| Output Torque at Rated PSI (inch/pounds) | 2669 in lb |
| Mounting Holes | 0.535 in |
| Mounting Hole Size | 0.535 in |
| Seal Material | Buna-N |
| RPM [Max] | 243 rpm |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Port Location | Side Port |
| Maximum Speed @ Continuous Flow | 243 rpm @ 15 gal/min |
| Duty | Standard-Duty |
| Flow Rate | 15 gal/min |
| Mounting Type Code | A |
| Bolt Circle Dia. | 4.19 in |
| Splines | 0 |
| Case Drain Code | 0 |
| Series | H Series |
| Output Shaft Code | 01 |
| Case Drain | None |
| Flange Orientation | Standard |
| Weight | 13.0 LB |
