Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2 NPTF Port
- 14.1 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Port Size | 1/2 |
| Mounting Type Code | A |
| Port Type | NPTF |
| Motor Type | Spool Valve |
| Material | Cast Iron |
| Bolt Circle Dia. | 4.19 in |
| Flow Rate | 15 gal/min |
| Special Features Hardware Code | AA |
| Corrosion Resistant | No |
| Flow [Max] | 15 gal/min |
| Splines | 0 |
| Port Code | B |
| Mount Type | 2 Bolt |
| RPM [Min] | 243 rpm |
| Special Features Assembly Code | 0 |
| Duty | Standard-Duty |
| Case Drain Code | 0 |
| Mounting Holes | 0.535 in |
| Output Shaft Code | 01 |
| Case Drain | None |
| Displacement (in³/rev) | 14.1 |
| Motor Element | Gerotor |
| Output Torque at Rated PSI (inch/pounds) | 2669 in lb |
| Pressure [Max] | 1450 psi |
| Paint Code | A |
| Seal Material | Buna-N |
| Rotation | Standard Rotation |
| Series | H Series |
| Mounting Hole Size | 0.535 in |
| Port Size & Location | 1/2 in NPTF Side |
| Port Location | Side Port |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Special Features | Free Running Gerotor |
| Flange Orientation | Standard |
| Pilot Diameter | 3.25 in |
| RPM [Max] | 243 rpm |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Shaft Type | Straight w/ Woodruff Key |
| Maximum Speed @ Continuous Flow | 243 rpm @ 15 gal/min |
| Inlet Pressure [Max] | 2500 psi |
| Weight | 13.0 LB |
