Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 22.6 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Seal Material | Buna-N |
| Pressure [Max] | 1250 psi |
| Output Torque at Rated PSI (inch/pounds) | 3602.25 in lb |
| Motor Element | Gerotor |
| Case Drain Code | 0 |
| Special Features Assembly Code | 0 |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Series | H Series |
| Shaft Type | Straight w/ Woodruff Key |
| Mount Type | 2 Bolt |
| Case Drain | None |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Pilot Diameter | 3.25 in |
| RPM [Min] | 152 rpm |
| Port Size | 1/2, 1/2-14 |
| Rotation | Standard Rotation |
| Flow [Max] | 15 gal/min |
| Displacement (in³/rev) | 22.6 |
| Special Features Hardware Code | AA |
| Geroter/Geroler Options | Free Running |
| Inlet Pressure [Max] | 2500 psi |
| Port Size & Location | 1/2 in NPTF Side |
| Special Features | Free Running Gerotor |
| Corrosion Resistant | No |
| Maximum Speed @ Continuous Flow | 152 rpm @ 15 gal/min |
| Mounting Hole Size | 0.535 in |
| Output Shaft Code | 01 |
| Port Location | Side Port |
| Material | Cast Iron |
| Flange Orientation | Standard |
| Port Type | NPTF |
| Port Code | B |
| Duty | Standard-Duty |
| Flow Rate | 15 gal/min |
| Mounting Holes | 0.535 in |
| Motor Type | Spool Valve |
| RPM [Max] | 152 rpm |
| Splines | 0 |
| Paint Code | A |
| Bolt Circle Dia. | 4.19 in |
| Mounting Type Code | A |
| Weight | 13.0 LB |
