Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 4.5 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Port Code | A |
| Series | H Series |
| Displacement (in³/rev) | 4.5 |
| Seal Material | Buna-N |
| Splines | 0 |
| Port Type | SAE O-Ring |
| Shaft Type | Straight w/ Cross Hole |
| Paint Code | A |
| Flow [Max] | 15 gal/min |
| Mounting Type Code | A |
| Shaft Size & Type | Straight |
| Maximum Speed @ Continuous Flow | 760 rpm @ 15 gal/min |
| Pilot Diameter | 3.25 in |
| Output Torque at Rated PSI (inch/pounds) | 1044 in lb |
| Rotation | Standard Rotation |
| RPM [Max] | 760 rpm |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Pressure [Max] | 1800 psi |
| Flange Orientation | Standard |
| Case Drain | None |
| Bolt Circle Dia. | 4.19 in |
| Case Drain Code | 0 |
| Output Shaft Code | 08 |
| Special Features | None |
| Material | Cast Iron |
| Duty | Standard-Duty |
| Port Location | Side Port |
| Mounting Hole Size | 0.535 in |
| Special Features Assembly Code | 0 |
| Mount Type | 2 Bolt |
| Special Features Hardware Code | 00 |
| Motor Type | Spool Valve |
| Inlet Pressure [Max] | 2500 psi |
| Corrosion Resistant | No |
| Motor Element | Gerotor |
| Port Size | SAE-10, 7/8-14 UNF |
| Mounting Holes | 0.535 in |
| Flow Rate | 15 gal/min |
| Port Size & Location | SAE-10 Side |
| RPM [Min] | 760 rpm |
| Weight | 11.5 LB |
