Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 4.5 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Motor Type | Spool Valve |
| Pilot Diameter | 3.25 in |
| Special Features Hardware Code | 00 |
| Displacement (in³/rev) | 4.5 |
| Series | H Series |
| RPM [Min] | 760 rpm |
| Corrosion Resistant | No |
| Splines | 0 |
| Shaft Size & Type | Straight |
| RPM [Max] | 760 rpm |
| Inlet Pressure [Max] | 2500 psi |
| Case Drain Code | 0 |
| Special Features Assembly Code | 0 |
| Case Drain | None |
| Port Code | A |
| Mount Type | 2 Bolt |
| Paint Code | A |
| Special Features | None |
| Motor Element | Gerotor |
| Mounting Hole Size | 0.535 in |
| Port Type | SAE O-Ring |
| Shaft Type | Straight w/ Cross Hole |
| Port Size & Location | SAE-10 Side |
| Duty | Standard-Duty |
| Output Torque at Rated PSI (inch/pounds) | 1044 in lb |
| Material | Cast Iron |
| Bolt Circle Dia. | 4.19 in |
| Output Shaft Code | 08 |
| Flange Orientation | Standard |
| Pressure [Max] | 1800 psi |
| Rotation | Standard Rotation |
| Port Size | SAE-10, 7/8-14 UNF |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Flow Rate | 15 gal/min |
| Flow [Max] | 15 gal/min |
| Seal Material | Buna-N |
| Mounting Holes | 0.535 in |
| Port Location | Side Port |
| Mounting Type Code | A |
| Maximum Speed @ Continuous Flow | 760 rpm @ 15 gal/min |
| Weight | 11.5 LB |
