Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF-2B SAE O-Ring Port
- 14.1 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Port Size & Location | SAE-10 Side |
| Corrosion Resistant | No |
| Pressure [Max] | 1450 psi |
| Duty | Standard-Duty |
| Bolt Circle Dia. | 3 1/4 in |
| Motor Type | Spool Valve |
| Special Features | Free Running Gerotor |
| Material | Cast Iron |
| Port Code | A |
| Mounting Holes | 3/8-16 |
| Output Shaft Code | 01 |
| Displacement (in³/rev) | 14.1 |
| Motor Element | Gerotor |
| Special Features Assembly Code | 0 |
| Pilot Diameter | 1.75 in |
| Mount Type | 4 Bolt |
| Seal Material | Buna-N |
| Case Drain | None |
| Flow [Max] | 15 gal/min |
| Geroter/Geroler Options | Free Running |
| Maximum Speed @ Continuous Flow | 243 rpm @ 15 gal/min |
| Port Location | Side Port |
| Special Features Hardware Code | AA |
| Inlet Pressure [Max] | 2500 psi |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Paint Code | A |
| Shaft Size | 1 |
| Port Type | SAE O-Ring |
| Mounting Type Code | B |
| Port Size | SAE-10, 7/8-14 UNF-2B |
| Shaft Type | Straight w/ Woodruff Key |
| Splines | 0 |
| RPM [Max] | 243 rpm |
| Flow Rate | 14 gal/min |
| (Catalog) Shaft Type | 1 in x 1/4 in Straight |
| Output Torque at Rated PSI (inch/pounds) | 2673 in lb |
| Viscocity (SUS) [Max] | 100 |
| RPM [Min] | 243 rpm |
| Series | H Series |
| Flange Orientation | Standard |
| Case Drain Code | 0 |
| Rotation | Standard Rotation |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Mounting Hole Size | 3/8 in |
| Weight | 13.0 LB |
