Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF-2B SAE O-Ring Port
- 14.1 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Mounting Holes | 3/8-16 |
| Output Shaft Code | 01 |
| Motor Type | Spool Valve |
| Mounting Type Code | B |
| Duty | Standard-Duty |
| Flow [Max] | 15 gal/min |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Maximum Speed @ Continuous Flow | 243 rpm @ 15 gal/min |
| Geroter/Geroler Options | Free Running |
| (Catalog) Shaft Type | 1 in x 1/4 in Straight |
| Mounting Hole Size | 3/8 in |
| Flow Rate | 14 gal/min |
| Bolt Circle Dia. | 3 1/4 in |
| Flange Orientation | Standard |
| Pilot Diameter | 1.75 in |
| Pressure [Max] | 1450 psi |
| Mount Type | 4 Bolt |
| Port Location | Side Port |
| Seal Material | Buna-N |
| Splines | 0 |
| Corrosion Resistant | No |
| Viscocity (SUS) [Max] | 100 |
| Output Torque at Rated PSI (inch/pounds) | 2673 in lb |
| Shaft Size | 1 |
| Case Drain Code | 0 |
| Port Size & Location | SAE-10 Side |
| Case Drain | None |
| Rotation | Standard Rotation |
| Special Features Hardware Code | AA |
| RPM [Max] | 243 rpm |
| Port Size | SAE-10, 7/8-14 UNF-2B |
| Special Features | Free Running Gerotor |
| Port Type | SAE O-Ring |
| Port Code | A |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Material | Cast Iron |
| Inlet Pressure [Max] | 2500 psi |
| RPM [Min] | 243 rpm |
| Series | H Series |
| Displacement (in³/rev) | 14.1 |
| Special Features Assembly Code | 0 |
| Motor Element | Gerotor |
| Shaft Type | Straight w/ Woodruff Key |
| Paint Code | A |
| Weight | 13.0 LB |
