Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 11.3 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| RPM [Max] | 304 rpm |
| Special Features Hardware Code | 00 |
| Mounting Type Code | B |
| Output Torque at Rated PSI (inch/pounds) | 2345.45 in lb |
| Duty | Standard-Duty |
| Shaft Size | 1 |
| Mounting Holes | 3/8-16 |
| Motor Type | Spool Valve |
| Port Code | G |
| Shaft Type | Tapered w/ Woodruff Key |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Port Size | SAE-8, 7/8-14 UNF |
| Output Shaft Code | 18 |
| Shaft Size & Type | Tapered |
| Paint Code | A |
| Flange Orientation | Standard |
| Special Features Assembly Code | 0 |
| Port Location | End Port |
| Inlet Pressure [Max] | 2500 psi |
| Special Features | None |
| Port Type | SAE O-Ring |
| Pilot Diameter | 1.75 in |
| Mount Type | 4 Bolt |
| Motor Element | Gerotor |
| Maximum Speed @ Continuous Flow | 304 rpm @ 15 gal/min |
| Bolt Circle Dia. | 3 1/4 in |
| Case Drain Code | 0 |
| Splines | 0 |
| Rotation | Standard Rotation |
| Mounting Hole Size | 3/8 in |
| Flow [Max] | 15 gal/min |
| Viscocity (SUS) [Max] | 100 |
| Flow Rate | 15 gal/min |
| Series | H Series |
| Pressure [Max] | 1600 psi |
| Seal Material | Buna-N |
| Material | Cast Iron |
| Case Drain | None |
| Displacement (in³/rev) | 11.3 |
| Corrosion Resistant | No |
| Weight | 13.0 LB |
