Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2 BSPP Port
- 2.8 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Inlet Pressure [Max] | 2500 psi |
| Pilot Diameter | 3.25 in |
| Mount Type | 2 Bolt |
| Mounting Type Code | A |
| Output Shaft Code | 01 |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Case Drain Code | 2 |
| Flow [Max] | 12 gal/min |
| Special Features Assembly Code | 0 |
| Displacement (in³/rev) | 2.8 |
| Rotation | Standard Rotation |
| Port Location | Side Port |
| Paint Code | A |
| Port Type | BSPP |
| Series | H Series |
| Flange Orientation | Standard |
| Motor Type | Spool Valve |
| Splines | 0 |
| Corrosion Resistant | No |
| Mounting Hole Size | 0.535 in |
| Shaft Type | Straight w/ Woodruff Key |
| Duty | Standard-Duty |
| Mounting Holes | 0.535 in |
| Bolt Circle Dia. | 4.19 in |
| Port Code | E |
| Material | Cast Iron |
| Special Features | None |
| Port Size | 1/2 |
| RPM [Min] | 969 rpm |
| Special Features Hardware Code | 00 |
| RPM [Max] | 969 rpm |
| Motor Element | Gerotor |
| Pressure [Max] | 1800 psi |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Output Torque at Rated PSI (inch/pounds) | 650 in lb |
| Case Drain | G 1/4 (BSP) |
| Maximum Speed @ Continuous Flow | 969 rpm @ 12 gal/min |
| Flow Rate | 12 gal/min |
| Seal Material | Buna-N |
| Weight | 13.0 LB |
