Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2 BSPP Port
- 2.8 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Mounting Hole Size | 0.535 in |
| Flow [Max] | 12 gal/min |
| Bolt Circle Dia. | 4.19 in |
| Mounting Type Code | A |
| Pilot Diameter | 3.25 in |
| Mount Type | 2 Bolt |
| Shaft Type | Straight w/ Woodruff Key |
| Mounting Holes | 0.535 in |
| Maximum Speed @ Continuous Flow | 969 rpm @ 12 gal/min |
| Motor Element | Gerotor |
| Material | Cast Iron |
| Case Drain | G 1/4 (BSP) |
| RPM [Max] | 969 rpm |
| RPM [Min] | 969 rpm |
| Case Drain Code | 2 |
| Port Size | 1/2 |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Output Shaft Code | 01 |
| Displacement (in³/rev) | 2.8 |
| Inlet Pressure [Max] | 2500 psi |
| Corrosion Resistant | No |
| Flow Rate | 12 gal/min |
| Motor Type | Spool Valve |
| Special Features | None |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Port Code | E |
| Port Type | BSPP |
| Flange Orientation | Standard |
| Output Torque at Rated PSI (inch/pounds) | 650 in lb |
| Seal Material | Buna-N |
| Special Features Hardware Code | 00 |
| Series | H Series |
| Duty | Standard-Duty |
| Special Features Assembly Code | 0 |
| Paint Code | A |
| Pressure [Max] | 1800 psi |
| Splines | 0 |
| Rotation | Standard Rotation |
| Port Location | Side Port |
| Weight | 13.0 LB |
